Lamp #13

A medium ribbed 125 mm lamp shade that can use its own base and cover resulting in a 215 mm lamp.

The lamp shade has a 30mm hole so can also be used as a shade with some other lamp bases: 

https://www.printables.com/model/853136-lamp-base-3

https://www.printables.com/model/850873-lamp-base-2

https://www.printables.com/model/849141-lamp-base-1-3-leg-stand-e14

Shade - 125 mm height x 95 Width
w/ Base and cap - 215 mm height 

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:
     https://www.amazon.de/dp/B0B5MPL9MX

The slicer settings for the base and cap:

.20 mm Standard

(All standard settings and speeds, Random seam settings)

Filament:  Prusament Galaxy Black

The Shade:

Filament:  Sunlu PLA+ White

The slicer settings:

.16 mm High Quality and Generic PLA
Infill %  - 30 , Gyroid
Wall Loops - 8
Top Shell - 8
Bottom Shell - 6
Outer Wall Speed - 60 mm/s
Inner Wall - 150 mm/s

Seam Position- Aligned