Heavy Duty Roll Holder

I recently aquired a commercial sized roll of Aluminum Foil with quite some weight. After pondering some time i came to the conclusions that none of my existing roll holders are up to the task of holding that weight so i designed my own.

It was created with a 2020 Aluminum Profile in mind but i guess any 20mm square thingy should fit. At the Bottom (inside) is a recess for a M4 Nut and a corresponding hole for a M4 Screw to secure the Aluminum Profile in place so it wont slip out over time.

I also included some other file types then .stl. Feel free to remix as you please. =D

Have fun and Happy Rolling =P

Print Settings

• Printer brand:

Anycubic

• Printer:

Kobra 2

• Rafts:

Doesn't Matter

• Supports:

Doesn't Matter

• Resolution:

0.2

• Infill:

i used 35% Cubic

• Filament brand:

whatever floats your boat

• Filament color:

whatever floats your boat

• Filament material:

i used PLA but up to you

• Notes:

I used 4 walls and adjusted the top and bottom layers accordingly so the wall thickness is the same all around for stability reasons.