Infiray P2 Pro Macro lens mount

The original Infiray Macro Lens is seldom available and when it is it's expensive for what it is.

There are several other Infiray adapters uploaded but I couldn't see one that emulates the original item.

There is a hole in the adapter for a 8mm x 3.3mm (standard) neodymium magnet that makes this much easier to remove than a sleeve type adapter.

I have made it around a 18mm Diameter ZnSe lens (I accidentally ordered instead of the 15mm but in any case :-) ). I stuck with a focal length of 50.8mm which seems to be where the original Infiray model is at but the focal length will be personal preference so if you wan't to fit a bit more on screen go longer 50.8mm suits me.

I printed in TPU and glued the magnet in, the lens is push fit and is snug without being tight. I will probably print in Resin shortly as TPU loos a bit ammateur compared to the surface finish of resin. Either way I'm happy for now. 

The lens was half the price of an Infiray original so I may get a longer focal length lens with the money I've saved.