Auxiliary Fan Cover - Bambu Lab

As I often hit the fan and because of the dust that accumulates, I've decided to realize some Covers for the Auxiliary Fan.

If you like it, take a look at my other 3D printer accessory creations.

As you can see from the photos, there are different patterns:

Each of these patterns has three further configurations:

*** I recommend making the cover using PETG, ABS or CF materials especially if you frequently print with the chamber at high temperatures. ***

INSTALLATION:

1. Insert at least two fins into the first slot of the fan.
2. Push the remaining fin by slightly twisting the cover.

REMOVAL:

1. It is possible to use the slot created on the top flap to insert a small flat screwdriver into the fan cover.
2. Push down without prying on the fan in order not to damage it.