Nasal Activation by Snarling Amplification Blinking

Nasal Activation by Snarling Amplification Blinking (NASA Blinking for short)
Made by: Costescu Catalin Mihai (@portallabs on Instagram: Tag if you post this design somewhere and give me credit for the blueprints Thanks lots)

This module makes costumes/cosplay eyes able to blink by using the wearer's facial movements.

Inspiration taken from @speytime on Instagram: my design uses the same activation method as his but it uses a completely different amplification system

Notes:
* DO NOT print the flexure from the main file, instead open its dedicated file and follow the slicing pictures attached
* The files contain MY 3D scan (I DO NOT give my consent for my scan to be used for purposes outside this project). 
For fine-tuning you can replace it with yours and make the necessary changes.
* The .f3z files are the parametric files for Fusion 360

Required Materials:
PLA(For everything except the flexure), PETG(for the flexure)
3x M3x55mm bolts
5x M3 locking nut
2x M3x10mm bolts
2x M4x8mm heat inserts

1x M3 x 20mm set screw with pointy tip

3x cylindrical 5mmDx4mmL neodymium magnets
skin safe epoxy clay (Optional: put it on the interface surface and gently press it on your nose to get a direct imprint to help with power transfer)

HAVE FUN!
Can't wait to see what you come up with :)