Royal Enfield Himalayan BS4 wind deflector and windshield extension kit

This is a 3D printable version of our metal wind deflector kit for the Himalayan BS4 (2019).  This kit will replace the stock windshield, which often cracks at the fastener holes after some period of time. It is strongly recommended to use ASA or ABS when printing due to the high UV exposure. 

We also use the GPS mount the heavier GPS mount option. All festers holes are design for M6 x .1 heat insert, 12mm long. The window extension is an average off the shelf design, We are using Givi.