Nozzle Box

Please read the description of how to print this box

Print instructions

This one file contains several parts.

• If you want the box to be smooth on both sides (without descriptions) you can do it right after importing the file to slicer.

• If you want the inscriptions to be engraved on the top half of the box. After importing the file you need to click on the "split to objects" and then delete the parts that appear in the list (part from 3 to 15).

• If you want to print a box with inscriptions in a different color, split the file into parts ("split to objects" button) then remove the box parts and leave the inscriptions only and save gcode file.
  DO NOT FORGET TO REMOVE SKIRT!
  Save the second gcode file only with the box parts without inscriptions.

First print the inscriptions, immediately change the filament and start printing the second file with the box.
The inscriptions are low enough that there is no problem with mesh bed leveling.

I hope this is at least somewhat understandable :)