Glock hairbrush

I modeled and printed this very simple hairbrush in the shape of the popular Glock series. It's, easy to print without any supports.

You can print it with 0.4mm nozzle, but for better details I will recommend 0.25mm as I used.

There are different heights of layers so it makes some sort of 3D felling, and also it means it is suitable for color print by layers or usage for MMU/AMS.

Settings:

• 0,4mm/0.25mm nozzle
• 15% Infill
• 2 perimeters
• 0,2mm/0,15mm layer height 
• The material I recommend PETG, so it won't break so easily