Tri-Lug Socket adaptor

This allows you to use a 24mm Deep socket to install/remove a Tri-Lug muzzle device.

This fits over a Tri-Lug muzzle device and inside of a 24mm socket, then use a torque wrench to install to required torque per manufacturer.

I printed it in ASA at 100% infill on a BBL X1C.  After using it to install a muzzle device to 35 /Lbs/Ft there is a bit of deformation on the adapter, but it worked perfectly well.  This will not last forever, but if you are like me and just need to install a couple Tri-Lugs and don't want to spend $40 on a proper tool, this will do the job.  It is pennies of material and 30 minutes on the printer.  Job done.