Windmill dice tower (moving parts!)

Windmill dice tower

Cool addon for any dice/board game. Put dices into chimney and spin the knob across the wind blades to release the dices to the ground.

This model can be also used without 2nd floor as a middle size tower.
Also it can be used without 1st and 2nd floor as a small size tower.
All sizes can be combined with or without the chimney extension.

Model was designed for all users (does not need multicolor system).
It was made for 14mm/0.55in size dices. 
If you are using dices bigger than 14mm/0.55in, enlarge the model in your slicer,
example 120%, 135%, 150%

No support needed!
-printed in various PLA (basic, matte, marble)
-very easy assembly
-parts recommended to be glued (super glue):
     windows, door frame, top of the fence, blades to blade holder
 
Ground , 1st and 2nd floors  -  pause/filament change at layer 310.
Top  -  pause/filament change at layer 525.
Chimney extension  -  pause/filament change at layer 200.
Blades  -  pause/filament change at layer 34.

All objects are set on 5% infill type Gyroid.

Use any colors combination that you like, enjoy playing, and post your version of it!