Tired of working with cheap tripods or selfie-sticks that are not stable and keep falling over but don't want to buy an expensive one?
→ Try using these 3d printed feet. It's a quick, easy and cheap solution :)
Product infos
Product dimensions: L=160mm, W=70mm, H=25mm
Insert dimensions: L=24mm, W=9mm, D=10mm
Two slots for anti-slip stickers underneath.
Recommended print settings:
→ default settings will work just fine
Printed with PLA+ white
220°C extr. temp. anf 60°C bed temp.
Layer Height: 0,2mm
Infill: 40% density (grid pattern)
NO Supports & NO Brims
The author marked this model as their own original creation.