120 mm Fan Cover with Infillpattern

Printable Filter & Cover for 120 mm Fan
- Mounting Holes: 105 mm apart
- Overall Size: 120 mm diameter
- Thickness: 2 mm
- Model Features: Does not contain a grid. It has an infill with 0 top and 0 bottom layers. In the provided example, it's 30% infill using a 0.4 mm nozzle.

Additional Description
- The cover is perfect for concealing the unsightly side of the fan.
- It is suitable for placing GPU brackets on top when a fan is located underneath.
- Aesthetically pleasing as RGB lighting can still shine through.

Printing Tips

– If you want to use it as a Dust Filter, make the infillpercentage Higher

– Make sure to Print it flat and use a Colour Fitting for Your PC

- If you increase the wall thickness/Wall Line Count, it might reduce the probability of     breaking at the weaker screw holes

– Have Fun

Settings Used

–  Top/Bottom Thickness 0

–  Infill 30 %

– Layer Height 0.2 mm

– Wall Width 0.4 mm

– Wall Thickness 1.2 mm

– Wall Line Count 3