Official Prusa Enclosure LED strip bracket (for standard 24V LED strip)

LED strip bracket for Official Prusa Enclosure.

I bought this 24V LED Strip :
https://www.amazon.fr/dp/B09F2BX5ZV?psc=1&ref=ppx_yo2ov_dt_b_product_details

I have connected the LED Strip directly to the Prusa basic board for led/fan :
https://www.prusa3d.com/fr/produit/basic-board-and-psu-for-original-prusa-enclosure-for-filtration-unit-and-led/
But it can be connected with other power source.

If you don't know how to connect standard LED strip to the Prusa basic board, you can follow this super guide :
https://www.printables.com/fr/model/594797

I have printed it with PETG on a Qidi Xmax 3. Heat inserts M3x5.7 from CNC Kitchen (x3).
NO SUPPORT needed but you have to get perfects bridges before to print this STL.
330x330 bed surface minimum to print it in one piece !!

Suggestion : don't add brim in the middle where you have to slide the led strip after printing, it's really hard to remove perfectly.
If you need brim for bed adhesion I have added an STL with manual brim and picture to show how to slice the model (mouse ear recommanded in slicer).