Ikea Skadis - Dronjons basket adapter

Just a simple Skadis adapter for mounting Dronjons baskets. The cheapest way to have any basktets on the skadis wall. Compared to the regulare Skadis jar / basket, it cost 64% less and as a bonus, you can see through :-)

Print instructions

• PLA
• 0.6 Nozzle
• 0.2 Layer
• 3 perimeters
• 100% infill

Assembly

• Just guide the pins through the wall of basket
• Use your soldering iron tip (230°C) to melt the pin and push it against the wall
• I used exacto blade to flatten molten plastic

Please check your basket hole spacing, in my experience it changed for the recent purchases in 2024. This model reflets the updated spacing of 13.8mm. The hook is narrower then previous versions as the Ikea Skadis fabrication become quite sloppy and the hole tolerances are not existing anymore …