Lid Uniz Ibee resin printer

Fits on top of the resin vat on the Uniz Ibee printer. It's a tight fit between the fasteners in the four corners and the lid, but it will rest on the vat edge.

Doubles as a base for the vat preventing the film from touching the table or slap-mat when placing the vat on the table.

Print in PLA or PETG. PLA seems to withstand resin better than other filaments. 

Then again, it's not likely to be in contact with resin anyway, so choose something dark and opaque. 

Printed on a Prusa XL with 0,6mm nozzle and 0,32mm layer height. I guess it will print well with a 0,4mm nozzle.

If you want to print with text, print with text down. If not, choose the no-text version. Print with cover down.