K1 Max Nut Trap for Magnetic Door Seal

If you've downloaded my K1 Max Magnetic Door Seal https://www.printables.com/model/860107-k1-max-magnetic-door-seal and aren't interested in using 3M tape to secure the top and bottom magnets, this is the solution. 

The amazon links provided below are my affiliate links, if you use those links to buy your hardware you will also be directly contributing to me as well. Please consider using those links if you need to buy the hardware. 

The diameter of the hole for the magnet is 10.15mm and has a height of 6mm. These dimensions are to press fit two 10mmx3mm magnets. 

-Magnets

-Tape

-M3 bolt set

I've included the .STEP file in case anyone wants to make changes for different sized magnets. 

Added a space to press fit a magnet under the nut.