Kirigami for Rook2020 v2
Revised design of the kirigami bed mount, It's stiffer and more difficult to install
3
11
0
88
updated May 1, 2024
Description
PDFPlease read before downloading:
- You will need to permanently modify a kirigami bed holder (voids waranty)
- Please use another design if you don't want to permanently modify your kirigami
Stuff needed:
| Part Name | Amount Required | Printable? | Recommended Material | Infill Density |
| Bottom rod mount | 2 | Yes | ABS | 100% |
| Top Rod Mount | 2 | Yes | ABS | 100% |
| Adaptor | 1 | Yes | ABS | 100% |
| End stop Hitter | 1 | Yes | ABS | 100% |
| Kirigami | 1 | No Good Luck | Steel - Powder Coated | 100% |
| LM8UU bearing (double length recomended) | 2 | No | Steel | 100% |
| 8mm Linear rod | 2 | No | Chrome- plated hardened Steel | 100% |
| M3 Nutz | 8 | No | Black-anodized Steel | 100% |
| M3 Bolts | 8 | No | Black-anodized Steel | 100% |
Please refer to the CAD file for assembly and orientation
Designed for Rook-2020 (Rolohaun Design)
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
- Requires the user to drill/resize 8 holes on the kirigami bed.
- Shape optimization of bodies (less prone to failure.
- longer contact area with linear bearings
