Articulated Pikachu - Print in Place

This adorable wiggly little Pikachu makes the perfect fidget toy for the Pokémon lovers in your life! Print profiles provides for both an AMS-compatible coloured version and a single-colour version.

Behind the model

I sculpted this model with a combination of Nomad3D and Blender, before colouring in BambuStudio.

Printing tips

I recommend adding supports under the chin as the angle is a little bit sharp. These supports are pre-painted in the 3MF file.

The pieces may stick slightly when printed. If this happens to you, press them firmly into each other to break any loose attachments.

If printing the multicoloured versions, make sure your flush volumes are fine-tuned.

Layer nozzle: 0.4mm

Layer height: 0.2mm or less

Perimeters: 2-3

Infill: Gyroid 8%