NFC Business Card Case - Blank
Description
PDF*Limited time download* I plan on putting the file up for sale in the near future.
I was inspired to make this when I realized that people like to have options when sharing their contact info. I am also terrible about restocking my wallet with my business cards, also it seems like the wallet gets too fat with a bunch of cards taking up space. No one likes a fat wallet for the wrong reasons.
This is designed to be used on at least a 2TH Prusa XL. A Mk3/4 version will be coming soon.
Be mindful of your bridge settings or use supports on the inside of the card case. It is a 90 mm bridge. If you have no supports and poor bridge settings you will get some significant drooping. Or you know, use supports.
I have attached one as a standard .3MF for regular use and another that has all of my slice settings.
The revised file has some minor improvements, like an additional chamfer and more clearance for the embedded components.
Recommend print settings:
.2 mm layer height
15% infill - honeycomb
concentric top and bottom fill pattern
BOM:
CF PLA (Use any PLA you want, TPU doesn't stick well with PETG, have not tested with anything other than PLA and PETG)
95A TPU
4 - 1 X ¼ X 1/16 Inch Magnets
https://totalelement.com/products/1-x-1-4-x-1-16-inch-neodymium-rare-earth-bar-magnets-n42-32-pack
or..
8 - 1 X ¼ X 1/32 Inch Magnets (can get one more print out per pack and is about $0.30 cheaper per unit)
https://totalelement.com/products/1-x-1-4-x-1-32-inch-neodymium-rare-earth-bar-magnets-n42-72-pack
1- NFC token 0.98 x 0.98 x 0.03 inches (you don't need to use this one as long as the dimensions match.)
To use the NFC token I use an app on my Android phone called NFC tools. If you hit the ? button on the top right corner of the app it can give you a quick run-through on how to use it.
Also this.
Tags
Model origin
The author marked this model as their own original creation.
