5.6X52mm Rimmed Head Up, Double Latch Modular Ammo Box

Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options.

Other ammo boxes of this type can be found in my Double Flex Latch Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/176717.

This is a caliber specific, snap together cartridge box. The cartridge box is assembled from separate parts that are printed in orientations chosen to maximize strength and then snapped together. This is a sturdier version of https://www.thingiverse.com/thing:5270385 or https://www.printables.com/model/187176-modular-ammo-box that is intended to better handle larger and heavier cartridges in high counts.

Check for the latest hinges and latches in https://www.printables.com/model/187176-modular-ammo-box-common-parts or https://www.thingiverse.com/thing:5270385 .
 

Assembly instructions: See the attached PDFs

Print Settings

Supports:

Yes

Infill:

10% Gyroid

Notes:

Supports are only required under the horizontal overhangs.

Do not use Perimeter Generator: Arachne on the box bottoms.

The Flex Latch must be printed in a flexible material - like PETG. Sometimes PLA will work, but I'm finding it rare.

Category: Tool Holders & Boxes