Hexagonal light panel

These are some of the parts needed to construct a hexagonal grid light panel. In addition to these parts you need a sheet of material such as poly-carbonate or plywood as a back, a power supply, a controller such as WLED and led lights with 33 mm spacing such as https://www.amazon.com/gp/product/B097BX7P3V The light diffusers are ideally printed with .2 mm bottom layers but feel free to print the sides in .3 etc. The main body needs to be assembled in some way, I chose epoxy and there are models for clips to hold things in place included. The strips in the model are for screwing through or drilling holes for bolts where necessary. The method of hanging I used was using the “pipe holder” model bolted to both the poly-carbonate as well as ceiling and then running ½ inch EMT conduit through it