Tactile Turn Bolt Action Pen - Pilot G2 to Parker Refill Adapter

These two parts enable you to use Parker style refills instead of Pilot G2 refills in your standard length Tactile Turn Bolt Action Pen (standard meaning the longest of the 3 variants).

The filled in cylinder part just goes into the pen before you put the refill in to basically provide extra length to the Parker refill that it needs to work in the pen. The other part just goes over the thin part of the Parker refill to make it mimic the Pilot G2 refill in dimensions.

Works confirmed for both regular and slim version of the Tactile Turn Bolt Action Pen (longest length). Can't comment on compatability with the side click or any other Tactile Turn model as I don't own any of those and don't know whether their internals differ from the bolt action pen.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2mm layer thickness

Infill:

50%

Filament: Geetech PLA

Notes:

Make sure "print thin walls" is enabled if you are using Cura as your slicing programm, otherwise the top part of the module that attaches to the front of the parker style refill won't print.

How I Designed This

I compared the parker style refill (In my specific case a Schneider Slider 755 XB) to the Pilot G2 refill in terms of dimensions, measured the required points and then basically designed 2 parts to make the parker refill imitate the dimensions of the G2 refill.