Ender 5 Mount for Filament Run-out Sensor

A bracket for the ultra cheap AliExpress filament run-out sensors that cost roughly $1.
 

Note: this sensor will not work with the stock Creality control boards. I used this with a BTT/BIQU SKR Mini board and it was plug-and-play.

I uploaded 2 versions, one for the stock Creality extruder and another for the after market "Dual Gear" extruders (as pictured).

Compatibility: Ender 5, Ender 5 Pro, Ender 5 Plus

Parts:

• KINGRON Filament Run-out Sensor (https://www.aliexpress.us/item/2251832731147963.html)

Requires:

• 2x screws to mount sensor module
• 2x M4x8mm bolts
• 2x M4 TNuts for 20 Series Slot (https://www.aliexpress.us/item/2251832628044342.html)

Print Settings:

• PETG or similar
• 0.2 Resolution
• 4 Walls
• 15% infil
• No Supports