Fuji X100V / X100VI camera filter adapter 49mm - angular version II
Description
PDFFuji X100V / X100VI camera filter adapter 49mm - angular version II
Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of Fujifilm X100V and X100VI cameras. Adapter is 9.2mm long to support full range of close up focusing. Tight fit with lens and filter is making camera weather protected and most important - sealing lens front from any dust migrating to sensor, but you have to accurately clean the lens front from any dust before mounting adapter.
NOTE: the model has exact 49mm thread size and may expand a bit, so it is recommended to scale up X and Y axis in slicer to 101% - 102%. The one on pictures is printed with Print Settings listed below after scaling up XY to 101%.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: ELEGOO PLA black
Notes:
Slice model with X and Y axis scaled up to 101% - 102% (100% size will not fit standard 49mm thread).
If printing with default 0.4 nozzle, set:Print Speed: 50 mm/s
Wall count: 3
Wall Width: 0.3mm
Inifill Wall Width: 0.5mm
Initial Layer Line Width: 90% (to address heat expansion)
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.
