IKEA Skadis Connectors

A simple bracket set joining two points on two separate IKEA Skadis Pegboards. Use as many brackets as needed.

Brackets are 3mm thick. M4 Screws used are 16mm long.

Uses Common M4 Screws, Washer, and Nut to firmly secure. 

I order metric/imperial fasteners from Grainger(.com), a very affordable option for small quantities of fasteners.

Ensure to print at 100% Infill!

M4 or M3 screws with washers will work.

M5's will struggle to fit through the Skadis holes as it is slightly too large.