Dice

3D Printed, 6 Sided Dice! Made On TinkerCad, with rounded edges, and is an easy print. The dice. are regular size, and take just over 20 minute's to print!

Infill: For the dice infill, I use either 100% infill or Gyroid, for the best result.

Numbers: The dice has 6 sides each consisting of a mark, 1-6. I recommend using white, or any light-colored filament, so the marks are easier to see. I use a Sharpie®, or any other black, or colored marker, (that's not to thick). I just make a quick dot on each hole, so that the numbers are easier to see.

Recommendations:  The slower the dice is printed the better, any stringing, layer shifts, or just bad quality, can affect the dice from rolling.

Enjoy!