DIN Rain Test Bench Power Inlet Module

Power inlet module mount for Michele Maffucci's DIN rail stand XL.  Designed for use with the somewhat standard switched + fused IEC C14 inlet.  The exact part I used is this one.  Install with 2x M4x20 BHCS.  See the included image for wiring.

I use this with the Mean Well NDR-120-24 PSU, which I have also built a terminal safety cover for.  I suggest replacing the glass fuse with one that is a better match for the power supply you end up using.  Make sure the fuse is rated for 120/240V+, and then select an amperage that is just barely larger than the input current of that power supply, e.g. 3A for the NDR-120-24 (which is rated for a max input current of 2.6A, NOT the output current rating of 5A).  Wire should be 24AWG at the absolute smallest, though 18AWG is recommended.

This is a fully original model.  Only marked as a remix because it is an accessory meant to be compatible with the linked project.