Functional Nerf Maverick Slide Replacement

Remix of Gemeneye's Maverick slide that I made to resuscitate a Maverick with a broken slide. Internal geometry has been modified to allow this to be used with an unmodified Maverick. May be a little “sticky”, the return spring on my Maverick with my print isn't quite strong enough to pull it back to the forward position.

Requires 3 “Nerf” screws (look for them in the fragments of your original slide) and a pin to prime the blaster (also in the original slide).

STL and STEP files included

Print Settings

Requires supports. I highly recommend tree supports set to only grow from the buildplate; cleaning supports out of the inside of the shell does not look enjoyable. Print on whatever face pleases you most.

My print (cover image for file listing) is not fully representative, as I had a filament jam right as the tactical rail was printing. 

Internal geometry reworked to allow for use in a stock Nerf Maverick. Stock attachment point removed, replaced with lanyard attachment point similar to a stock Nerf Maverick.