These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize.
A cylindrical air pruning pot for all your cylindrical air pruning pot needs!
The parts should scale in between the various sizes I've uploaded. If you have a specific size you would really like to print, just let me know and I can configure a new file.
Print Settings
Resolution:
0.2-0.3mm
Nozzle Diameter:
0.4mm
Line Width:
0.6mm (over extrusion for a thicker wall)
Bottom Layers:
3
Inner/Outer Wall Print Speed:
<30mm/s
Spiralize Outer Contour:
Yup
The author marked this model as their own original creation.