PFEIFER | Mini Power Whistle
Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle.
It takes only 10g to print and is available in 2 sizes, Regular and Mini, and a variety of tones:
Our cute rescue dog responds surpisingly well to the 4KHz.
Don't mind the print quality on the pictures.
I live in Taiwan (but I'm French.. long story..) and raining season just kicked.
It's so humid it's almost impossible to get my prints right.
Anyway...
Happy printing!
V2 UPDATE:
The keyhole on V1 versions was a bit too small, so was enlarged on V2.
DIMENSIONS (Regular) | W 35 mm x D 15 mm x H 50 mm
DIMENSIONS (Small) | W 30 mm x D 15 mm x H 36 mm
PRINTING | 30min
All STL files are already oriented properly.
Infill: 20%
Wall line count: 2
Resolution: 0.2~0.3mm/layer or less (the bases in the pictures were printed in 0.2mm/layer)
Build adhesion type: Brim 4mm
Supports: None
The author marked this model as their own original creation.