Reloading Die Rack

A wall mount to hold reloading dies with the shell holder.

Available for screw in or Multiboard.  The screw-in style uses M4 screws.  The Multiboard style uses Dual Snap Connector - Part B.  It will hold the die weight on the Mutlboard as is but I recommend printing Part A for a secure fit that will prevent it being knocked off.  https://thangs.com/designer/Keep%20Making/3d-model/Dual%20Snap%20Connector%20-%20DS%20Part%20A-974320

Available for standard dies or for dies with Lee Breech Lock Bushings.  The Breech Lock version might work with Hornday Lock ‘n Load bushings but I don’t have it to test with.  The standard version fits 7/8x14 inch standard threaded dies.

Available for 2, 3 or 4 die sets with a space for a shell holder.

Print Tips: I printed mine in PLA with 0.16 layer height, 15% infill, top side down, tree-supports for support arms and Multiboard connector.

The text in the pictures was added in the slicer.  There are way too many calibers to create STLs for all of them and it's super easy to add text in any decent slicer.

New design but uses the dual snap connector for multiboard attachment.