Magnatic filterholder for Godox AD200 H200R and V1

I want more colorgels for my AD200 with the H200R round head.
So i designt this magnatic version to easily mount self cutted 67mm diameter colorfilters or the round Rogue lightning filters.
Print bouth parts and glue 2-4 magnets, round 3mm Diameter and 2mm hight, in the holes and sand the edges of this part for a tight fit.
Place the 2nd part on a table and put the filter in the pit bevor attaching the part with the magnets.
Now it holds perfect on the flashhead and you can switch easy colors.

New added:

• a protection cap for the roundhead without any magnets. And you can store the filter holder in the cap and mount it on the flash.
• a sphere dome for light diffusion. (Need to print with support)
• a grid that also made to hold a colorgel.

  Print Settings

Rafts:

No

Supports:

0,2mm

Infill: