FYSETC Portable Input Shaper mount for Anycubic Vyper

Can be mounted on the bed and printhead.

Hardware:

• 6 M3 heatinserts
• 2 M3x5 screws (to fix it on the bed)
• 4 M3x6 screws (to fix the sensor on the mount and on the printhead)
• Optional: M3 washers for all of the screws

Can be printed with any material.

I used 30% infill with 3D-hexagons but you can pick whatever you like

Watch out for the cable when homing while its on the printhead, because it gets close to the extruder.