FormD T1 Exhaust Shroud

As seen in my YouTube video: The Ultimate FormD T1 Air Cooled Build

Features:
- Improves CPU thermals
- Reduces fan turbulence noise (by using circular cutouts for the fans)
- Easier fan mounting using M3 screws
- Zip tie holes for additional cable management

BOM:
8 x M3x4x5 heat set inserts
8 x M3x10 or M3x35 (Phanteks T30) or M3x30 (Noctua NF-A12)

*For the split variant you will need an additional 2 x M3x4x5 heat set inserts and 2 x M3x8 countersunk screws.

If you never worked with heat set inserts before, watch this.

Prerequisites / Compatibility:
- T1 v2.1 in 3 slot mode
- Thermalright AXP-90 x47 
- ASUS B650E-I ROG STRIX or AsRock B650I Lightning
- Corsair Vengeance DDR5 (non-RGB)

Will be updating the list of supported motherboards as reports come in from other users.

Changelog:
- Added .step files for easier remixing
- Added split model option for easier printing

Print recommendations:
Printed mine in ASA filament. Given the size of the shroud, you may need to experiment with scaling up the model by up to .5% if fitment is too tight. 

Also featured by Ogeh Ezeonu: Ogeh Ezeonu (@ogehezeonu) • Instagram photos and videos