Prusa I3 R2 EVO - Y Axis chain attack set

This accessory fits perfectly on the left side of the EVO (R2) carriage 300x200 size.

After installing it with 4 screws, you'll be able to connect a chain for the cables of

the heated bed and the thermistor. It is divided into 2 parts, the upper part has been

designed to accommodate an XT60 connector, so you'll be able to easily dismount the

plate and disconnect the cables. In the upper part there is also the engagement for the chain.

I decided to use an existing chain project so you only have to print the component in

the numbers you need. http://www.thingiverse.com/thing:10946

Enjoy