An adapter to use the Apogee toolhead with the stock Ender 3 exturder.
When using the stock extruder motor, the motor would hit the frame of the printer before activating the X-endstop. To avoid this you will either have to print the spacer and attach it to the left side of the X carriage so it hits the X-endstop (like shown in the picture) or use a pancake stepper motor for the extruder.
Print in PETG or ABS/ASA.
The main adapter should be printed on the backside and using supports.
The spacer should be obvious
The author marked this model as their own original creation.