3d printed Watch

This is an easy to print, stylish and customizable watch for everyday use.
The idea is to have the perfect watch for every occasion.

Enjoy!
(also have a look at this new version)

Print instructions

BOM:

printed parts and tools:

1x watch casing and band xxxmm_watch_0123456789.stl

1x dial and inner housing dial_inner_housing.stl

1x cover for the movement cover_movement.stl

1x spacer ring for glass spacer_ring.stl

4x latches for movement cover and inner housing latch.stl

1x hour hand hour_hand.stl

1x minute hand minute_hand.stl

1x knob for setting the time knob.stl

1x back cover cover.stl

tools:

1x key for back cover tool_key_f_back_cover.stl


 

non printable material and tools:

Full set available here: full set for 3D printed watch


1x glass 32x1mm with bevel

1x Miyota 2025 movement

1x stem for movement 

1x hourwheel for movement 

tools:

1x needle 1,2mm with +0 -0.02mm tolerance

1x needle 0,7mm with +0 -0.02mm tolerance

1x superglue


 

How to make it

If you are an experienced maker you will not have problems with printing it.
Find detailed information here. I am updating continuously.
 

 

Things to consider:

• The number in the name of the files is your wrist measurement. Some slack is already added. It is still hard to guess the needed slack for every wrist...
• Use PLA
• When printing the small parts always print eighter many of them or with something else so the layers have time to cool
• inner housing: make sure that you print with layer hights that give you exactly 0.3mm thickness at the dial (watch face). eg first layer 0.2 then 0.1 or all 0.1 or all 0.075. You get the idea.
• Ajust the holes at the hands with a 0.7mm and a 1.2mm needle
• Glue the minute hand to the pinion with superglue
  -Make sure the inner surface of the dial (where the movement sits) is very flat with no unevenness
  
  
  
   

References

Thank you printables for the weekly print!