Veritas Track - Bosch Router Jig

Router base for the 1617EVSP Bosch plunge router base for use with the Veritas Power Tool guide system and is meant to mount to the Veritas tool guide traveler.

Requires a printer with a minimum print volume 240mm (unfortunately this does not fit on the MK4.

Printed using Bambu X1C

Tested using PLA, 15% infill with 2 walls

Recommend using PETG, 25% infill Gyroid or some other strong infill, 4 walls. Given this mounts to a router, you may want to elect for an even higher infill + wall count.