Shelby Logo v2

The original Shelby Logo is great but it has one small problem.  It's impossible to create the logo as depicted in the picture because a lack of levels.  Specifically, the gray ring around the outside and the red “Shelby” logo cannot be made by swapping filament colors because they are at the same height as adjacent layers of a different color.  My remix adds different layers to these items so that these colors can be achieved.  I essentially lowered the gray ring layer so that you can switch to gray, as well as I heightened the “Shelby” logo so you can switch it to red.  See the attached .3mf file for details but the color order is:

Color 1: Black (the base of the circle)

Color 2: Gray (for the gray ring around the outside)

Color 3: Black again (for the top of the circle before the snake and “Shelby” logo begin)

Color 4: Gray again (Snake starts here with “Shelby” logo)

Color 5: Red (to top off “Shelby” logo)

I then scaled it up to 16" (41 cm) to print on my Anycubic Kobra 2 Max.  It makes a great wall decoration!