180° Bambulab X1C Door Hinge V2

I suggest using the .3mf file provided for convenience.

The part of the hinge that attaches to the glass door, has a void in the middle. This is for the print to be paused and the female end of a 6mm binding screw to be glued in place. (DO NOT USE THIN SUPER GLUE!! You don't want it dripping down onto the build plate. Use a gel super glue. ) I printed with a .2mm layer height and inserted a pause at the beginning of layer 47.

If you don't want to use the binding screw you can use the arms and gaskets from V1. This uses PETG (hinge body), TPU (gaskets) and PLA (supports).

The part of the bottom hinge that is mounted to the frame should be printed with 100% infill.

Guide for removing the old hinges and mounting the new ones.

I have adjusted the parts so that a binding/Chicago screw can be used for the portion that mounts to the door, instead of having to force the existing screws into the holes. The original screws for the lower hinge can be reused. The gaskets have been modified to fit inside the glass door holes with the binding screws.