Holosun 407k Canted Picatinny Mount

Remix of Johny69's canted mount to incorporate Holosun 407k footprint instead of picatinny rail.

 The mount is all one piece(minus the slide), I just changed filament from pink to brown at the start of the added plate to highlight remix. Printer needs to be pretty tuned for mount. Print orientation to offer cleanest print, but needs lots of cleanup.

.12 layer height, 5 walls, 25% gyroid infill, tree supports with .06 z roof distance.

Removed rail section of mount and added plate to accept Holosun 407k optic. Added M3 heat insert nuts by printing mount, then drilling holes out to 4.7mm diameter and the depth of the insert.