Storage/Travel Box for Bigscreen Beyond Prescription Lens

print settings:

• PLA or PET-G
• 0.4mm line width
• 0.2 layer height
• 50%infill
• 2 top/bottom layer
• 2 perimeter
• no support

the hinge just snap in place, engage the left side first and slide the right side from under up until it click in place, this take a bit of force.

uses 4 3x2mm cylinder magnets (same as with the BSB magnet mod) to hold the lenses in place, the holes for the magnets are specially shaped for an easy yet sturdy press fit of the magnets