36MM BMW Oil Filter Wrench

UPDATE 8/25/24: just tested a new print of this with 2 perimeters and 15% infill, and it wasn’t strong enough, 4 perimeters is necessary. 

UPDATE 4/24/24: Enlarged the square hole ratchet to 10mm, it was too tightly dimensioned at exactly 3/8".

-----

Wrench only tested to fit on M54 without engine covers installed, may need to be taller in other scenarios. Update: Confirmed to fit M54 with engine cover installed.

Has a 3/8" hole for using with a 3/8" ratchet.

Recommended print settings:

• 20% gyroid infill

• 4 perimeters

• print in PC if possible, other materials might work too

• Optional: Print at 80 to 100% infill for more rigidity/strength