Killswitch Steamdeck mount

I created a mount for the Dbrand Killswitch case and added a screw option to the lock to retain the lock instead of needing to use epoxy or gloop to connect the parts. The lock is 0.5mm Thicker than the Dbrand file because it had too much slop for my case.

The Heatset insert used was a M3 insert made by CNC kitchen. Linked below:
https://cnckitchen.store/products/gewindeeinsatz-threaded-insert-m3-short-100-stk-pcs

I used the interface architecture for the plate to make a mount so the original lock would be able to be used.