Skid Blocks - Ridgid Miter Saw Stand

Made for loading and unloading saw in bed of truck without scratches
5
5
0
107
updated April 23, 2024

Description

PDF

Do you own the Ridgid Folding Miter Saw Stand? Specifically model AC9946 (May fit other models and makes such as Bauer, Hercules, Delta, etc. 

If so, you know loading it and unloading it in the back of a pickup truck is fairly easy. However, the scratches it puts on the equipment are no good. I wanted to keep mine looking good for as long as possible.

I designed these blocks to clamp onto the handle so that when loading it slides on them instead of the handle.

Super simple and easy printout of PLA (PETG could be a good option as well). When they get worn down, just reprint another set and use the same hardware.

I recommend printing with a minimum of 4 walls and 50% gyroid infill. I might even try my next set at 100% infill to see if they last even longer.

Post-processing you will need:

4 = 6-32 x 1.75"

4 = 6-32 x .50" 

8 = 6-32 nuts. 

Tags



Model origin

The author marked this model as their own original creation.

License