Golf 2 Central Console Plates

This is a 3D-Printable plate for the centralconsole of the Golf/Rabbit Mk2.
3
24
0
176
updated April 22, 2024

Description

PDF

Best choise for adding instruments to your Golf/Rabbit !
Normal instruments are 52mm (2 Inch).

There are several versions. Please contact me if you have any ideas or suggestions on this ;)

Screws needed are 3-4mm (1/10inch - 1/6inch) plastic or sheetscrews

First of all print the holders and the alignment-plate. Screw the holders to the alignment-plate (you need to gauge them to fit to the alignment-plate).
Then stick the plate into the console as shown on the pictures and screw the holders to the central console (ratchet or short screwdriver needed).
Remove the alignment-plate and screw on the plate you want. You can also use the alignment-plate as a pattern to use wood or such.

Have fun.

Edit. Actually put that in my car LOL. Works nice :D

Tags



Model origin

The author marked this model as their own original creation.

License