NOTSEK 54mm Bottomless Portafilter Tamping Station

I wanted something that I could use as a tamping station that can hold my NOTSEK 54mm Bottomless Portafilter, Normcore 53.3mm Spring Loaded Tamper and a custom puck screen holder (that can be found here) that holds 54mm puck screens.

The top of the portafilter holding section should also be able to fit the Umikot (54mm Version) WDT tool with lugs (that can be found here) without having to remove the portafilter from the holder.

Check the images for some drawings with what I would think are the most important dimensions, so you can see whether or not this can be used for your own equipment.

What I have on the tamping station:

• NOTSEK 54mm Bottomless Portafilter, https://www.amazon.co.uk/dp/B0BP751KQS?ref=ppx_yo2ov_dt_b_product_details&th=1
• Normcore 53.3mm Spring Loaded Tamper, https://www.amazon.co.uk/dp/B0BCJSV78X?ref=ppx_yo2ov_dt_b_product_details&th=1
• NOTSEK Puck Screen 54mm, https://www.amazon.co.uk/dp/B0CCTBFJNC?ref=ppx_yo2ov_dt_b_product_details&th=1
• Umikot (54mm Version), https://makerworld.com/en/models/169733#profileId-232490
• 54 mm Puck Screen Holder, https://makerworld.com/en/models/402941#profileId-304621 

Please be aware that this will obviously be going near food related products, so please make sure you print in something that is food safe, or that you are at least aware that what you printed might not be food safe.