Garmin Varia Seatpost Mount

Seatpost mount for Garmin Varia

Uses the ¼ turn puck for the existing mount, but is actually solid and not held on with large O-rings.

Two sizes, 25.4mm and 27.2mm, at a typical 73degrees seatpost angle. Other sizes available and angles available, but honestly the angle doesn't really matter.

Print as shown in the images, using supports on the underside of the large disc area, the supports on the hex nut are optional but easy enough to include so why not.

Recommend using ASA or another similarly tough and UV resistant material.

I've been using it for about 6 months throughout winter with no issues or concerns, it is solid.

Requires an M5 nyloc nut and an M5x12 or larger bolt, I have used a flange head bolt to spread the load.