Hubless Motorcycle (LEGO-compatible wheels and build instructions)

Hubs are a thing of the past. Be part of the future by building, playing with, and proudly displaying this hubless bike.

93.5% of the model is built out of LEGO TECHNIC, while the rest (the wheels and couplers) are printable. Complete, detailed build instructions are available for the full model.

The steering works, and there's a simple (non-functional, of course) twist grip on the handlebars.

Note that all colors are merely suggestions, so use whatever you want or have.

Note: This bike is a good action figure accessory.

As far as printing goes, it's fairly simple.

• Print the wheels horizontally.
• Use minimal to no support.
• Print the Coupler Half 2 large-side down. The wheel connection point will be a little rough, but it's in a spot that doesn't matter and the LEGO connections will come out better.

The build instructions include a parts list, including all printed parts. After printing, build on like it's a LEGO set.

I would recommend checking the parts list to make sure you have all of the LEGO pieces before printing. Even if you don't, get creative; the build an be altered to fit your collection.

Enjoy!