Anycubic mono x2 resin heater mount

A simple stand for ptc heater for anycubic resin printer/s. I created this project to heat up resin in my printer that sits in my garage but temperatures there drops under 20C in winter. It uses 12V PTC heater from aliexpress and W3001 controler. I'm using this setup with 100W heater and printed this with standard anycubic clear resin and it's doing great. Remember to use some kind of isolation (in my case aluminium foil tape) on printer cover so it doesn't melt. 

USE ON YOUR OWN RISK!

PTC heater i used to this project:

https://pl.aliexpress.com/item/1005006031234123.html

Thermostat:

https://pl.aliexpress.com/item/1005005246379175.html